Painted Factories and Floors

Factory Floor Work Undertaken

Sand, sweep and vacuum floor

Fill any holes with 2 pack floor filler

Use a roller to coat the floor with 2 pack floor paint

Leave and wait to dry

Rub down and scrape

Apply another coat of paint

Further Images of our Floor Work

Complete Factory Work Undertaken

Remove all existing plaster, suspended ceiling, mezzanine floor, glass partition wall, floor screed and cut back existing to create new room dimensions

Construct new partition wall

Security mesh existing blockwork walls internal and external of the secure room and re-board and plaster.

Install new block and beam floor pocketed and sat onto existing block walls to specified height to create a new secure ceiling

Install a CPNI approved Stafford bridge door with a timber face finish

Install CPNI approved Stafford bridge manual door locks

Refit flooring and suspended ceiling

Install new partition walls beneath mezzanine floor

Ply external facing partition wall, plasterboard internal facing then plaster.

Fit 2 x 1200mmx 1000mm windows within the partition walls

Fit 1 x standard ply faced door and frame with furnishings within the partition wall

Fit a suspended ceiling to the underneath of the mezzanine floor

Decorate all areas

Further Images of our Factory Work